SPC and Laminate Flooring Supplier from China

Laminate Flooring
Laminate is an HDF or MDF core with a melamine decor paper, an AC-rated wear layer and a click profile. It is warmer and quieter underfoot than SPC at the same price point, and it is what most European distributors stock for bedrooms and living rooms.

6.2–12 mm
Thickness
AC1–AC5
Wear class
680–880 kg/m³
Board density
600 m²
MOQ (stock decor)
01 — CONSTRUCTION
Construction
A laminate board is a wood-fibre core pressed between a decor paper and an overlay, then milled for a click joint. There is no timber veneer anywhere in it — the wear surface is melamine resin with corundum, which is why the AC class, not the thickness, decides where the board can go.
- Overlay — melamine resin with aluminium oxide. The AC class is set here: AC3 for bedrooms and living rooms, AC4 for hallways and rentals, AC5 for shops and corridors.
- Decor paper — the oak, stone or tile print, 0.1 mm, pressed into the overlay under heat.
- Core — HDF at 810–880 kg/m³ (MDF 680–750 on the thicker boards). Density is what stops a heel sounding hollow.
- Backing — balancing paper. It keeps the board flat when the room swings between summer and winter humidity.
- Joint — milled click, 2G or 5G, the same profile family as our SPC on the long edge.
Where laminate loses to SPC is standing water. A standard board swells at the joint within hours; the waterproof grades (≤ 5 % / ≤ 7 % / ≤ 10 % in 24 h) buy time, they are not immunity. Kitchens and bathrooms belong to SPC or LVT.
02 — PLANK FORMATS
Plank formats
Six formats, each one a board build. Areas are per piece.
| Format | Size (mm) | Area / pc (m²) | Area / pc (sq ft) | Wear class |
|---|---|---|---|---|
| LP-01 | 1,220 × 200 | 0.244 | 2.63 | AC3 |
| LP-02 | 1,220 × 199 | 0.243 | 2.62 | AC3–AC4 |
| LP-03 | 603 × 100.5 herringbone | 0.061 | 0.66 | AC4 |
| LP-04 | 1,210 × 408 big herringbone | 0.494 | 5.32 | AC4 |
| LP-05 | 1,220 × 305 | 0.372 | 4.00 | AC4 |
| LP-06 | 600 × 600 tile | 0.360 | 3.88 | AC4–AC5 |
Carton counts are quoted per order — they change with the format and the pallet plan.
03 — SPECIFICATION RANGE
Specification range
| Property | Range |
|---|---|
| Thickness | 6.2 / 7 / 8 / 10 / 11 / 11.8 / 12 mm |
| Density | MDF 680–750 · HDF 810–880 · high density up to 1,000 kg/m³ |
| Wear class | AC1 (Class 21) · AC2 (22) · AC3 (23/31) · AC4 (32) · AC5 (33) |
| Plank sizes | 1,220 × 200 mm (6.2–8 mm) · 1,220 × 199 mm (10–12 mm) |
| Herringbone | 603 × 100.5 mm, 8 / 10 / 12 mm, V-groove |
| Big herringbone / parquet | 1,210 × 408 · 1,220 × 305 · 600 × 600, 10 / 12 mm, U/V EIR |
| Water resistance | Waterproof grades: ≤ 5 % / ≤ 7 % / ≤ 10 % swelling in 24 h |
| Formaldehyde | E1 standard · E0 / CARB Phase 2 / TSCA Title VI on request |
| Fire / slip | Bfl-s1 · R10 |
| MOQ | 600 m² stock decor · 3,000 m² custom |
04 — TESTED PERFORMANCE
Tested performance
The values below are the limits we quote against, not a single test report. A full report for the board you order is issued with the order.
| Test | Standard | Requirement / result |
|---|---|---|
| Wear class | EN 13329 | AC3 (23/31) · AC4 (32) · AC5 (33) |
| Thickness swelling | EN 13329 | ≤ 5 % waterproof grade · ≤ 10 % standard grade |
| Dimensional stability | EN 13329 | ≤ 0.25 % length, at 23 °C / 50 % RH |
| Formaldehyde | EN 717-1 | E1 ≤ 0.124 mg/m³ · E0 / CARB 2 / TSCA VI on request |
| Reaction to fire | EN 13501-1 | Bfl-s1 |
| Slip resistance | EN 13893 | R10 dry |
| Impact resistance | EN 13329 | IC2 residential · IC3 on request |
| Castor chair | EN 425 | No visible damage at 25,000 cycles |
05 — SURFACES AND TEXTURES
Surfaces and textures
AC3 and AC4 decors are what buyers reorder. These six cover oak, ash and walnut tones; the full library runs to twelve decors and seven embosses.






06 — INSTALLATION
Installation
Floating, on a 2 mm foam or 1.5 mm IXPE underlay. No adhesive, no nails.
- 01 Acclimatise — cartons flat in the room for 48 hours, at the temperature the room will run at.
- 02 Check the slab — flat to 3 mm under a 2 m straight edge, dry, swept. A 6 mil vapour barrier over concrete.
- 03 Set the first row — 10 mm expansion gap at every wall, spacers every 600 mm.
- 04 Work across the room — stagger short ends by at least 300 mm.
- 05 Close the room — cut the last row, pull the spacers, fit skirting or trim. A 15 m run needs a movement joint.
Do not glue a floating laminate floor, and do not double-layer underlay.
07 — MATCHING TRIMS
Matching trims
Made in the same decor paper as the board, 2,400 mm lengths:
- Skirting 2,400 × 60 / 80 / 90 × 15 mm
- Scotia 2,400 × 25–27 × 12 mm
- Quarter round 2,400 × 26 × 15 mm
- T-moulding 2,400 × 45 × 10/12 mm, plastic clip included
- Reducer 2,400 × 45 × 11/15 mm, plastic clip included
- Carpet reducer 2,400 × 35 × 12/15 mm, plastic clip included
- Stair nose 2,400 × 55 × 18 mm, plastic clip included
08 — HOW IT IS MADE
How it is made
Decor paper is impregnated, laid on the HDF, pressed under heat and pressure, then milled and packed — the pressing line sets the texture, the milling line sets the joint. Certification: CE (EN 14041), ISO 9001, ISO 14001, CARB Phase 2 on request. Copies with each order.

09 — WHERE IT IS USED
Where it is used
Rooms that stay dry and take foot traffic. Where water stands, use SPC or LVT.
Living & bedroom
AC3, 8 mm, 2 mm underlay — the volume line for European retail.
Hallway
AC4, 10 mm. The first two metres take more wear than the rest of the house.
Rental & multi-family
AC4 with a waterproof grade, 8–10 mm, for the turnaround cost.
Office & retail
AC5, 12 mm, IC3 impact. Specify a movement joint past 15 m.
10 — CHOOSING A STYLE
Choosing a style
Three decisions, in this order: where it goes (AC class), how it should feel underfoot (thickness and density), and what it looks like (decor and emboss). Everything else is detail.
- Bedrooms and living rooms: AC3, 7–8 mm, wide plank 1,220 × 200.
- Hallways, stairs and rentals: AC4, 10 mm, and take the stair nose with the order.
- Shops and corridors: AC5, 12 mm, and plan movement joints before you plan the layout.
- Herringbone: 603 × 100.5 needs a flat slab and a 10 mm expansion gap — it is not a small-room format.
11 — COMMON QUESTIONS
Common questions
AC3 or AC4?
AC3 is class 23/31 — bedrooms, living rooms, light commercial. AC4 is class 32 — hallways, offices, rental turnover. AC5 (33) is shops and corridors. Buy the class the room needs; a thicker board in the wrong class wears the same.
What does the density figure mean?
It is the finished board density. 830 kg/m³ means an HDF base around 780–800 kg/m³ before pressing. Below 800 the board sounds hollow under a heel and dents at the joint.
Is waterproof laminate really waterproof?
No. The waterproof grades hold the joint to ≤ 5 % swelling in 24 hours, which covers a spilled glass and a wet mop. Standing water for a day still gets in.
Can it go over underfloor heating?
Yes, water-based systems, with the surface held at or below 27 °C and the heat switched on gradually. Never over electric mat systems set in a thick screed without a thermostat per zone.
