SPC and Laminate Flooring Supplier from China

Basement Flooring
A basement is the hardest room in the house to floor: a concrete slab that stays cold, relative humidity that swings with the season, and often a ceiling height that rules out thick build-ups. The floor has to be waterproof through the core, stable under temperature change, and thin enough to keep the door swings working.
What actually matters on a slab
- Core, not coating. A waterproof surface film does nothing if water reaches an HDF core. Rigid SPC is waterproof through its full thickness; laminate is not, even the water-resistant grades.
- Vapour barrier. Over concrete below grade, a 0.15 mm (6 mil) polyethylene barrier is required unless the slab tests below 75 % RH. Skip it and the floor traps moisture under the planks.
- Flatness. 3 mm over 2 m for a standard plank, 3 mm over 2 m for wide plank too — the difference is that wide plank shows every hump.
- Thermal comfort. A 1.5 mm IXPE pad takes the edge off a cold slab and lifts impact sound by 15–20 dB.
- Build-up. A 5 mm SPC plus 1.5 mm pad adds 6.5 mm — usually the only option under a low bulkhead.
Recommended specification
| Product | 5 mm SPC Click Plank, 0.5 mm (20 mil) wear layer |
| Underlayment | IXPE 1.5 mm, or 6 mil vapour barrier over unseasoned slabs |
| Plank format | 182 × 1220 mm standard, 228 × 1520 mm for open spaces |
| Use class | Class 23 residential, Class 32 light commercial |
| MOQ | 600 m² per colour |
Products for basements
- 5 mm SPC Click Plank, 20 mil — the default choice: waterproof core, click install over a barrier, 6.5 mm build-up.
- 9″ × 60″ Wide Plank SPC — for finished basements where fewer joints matter more than subfloor tolerance.
- All SPC flooring — 4 mm rental grade through 8 mm commercial.
Installation notes
Lay the vapour barrier with 200 mm overlaps and tape the seams. Leave a 10 mm expansion gap at every wall and cover it with skirting, not sealant. Acclimatise cartons in the room for 48 hours. Do not install over a slab that has been wet in the last 60 days, and never glue SPC directly to a slab with rising damp — fix the moisture first.
Common questions
Can I put laminate in a basement?
Only with a proven dry slab and a barrier. Laminate’s HDF core will swell if moisture reaches it, and once it swells it does not recover. For a basement we recommend SPC.
Will it feel cold?
SPC is not warm underfoot on its own — the IXPE pad makes a noticeable difference, and underfloor heating works with SPC up to 27 °C surface temperature.
Send us your slab conditions and room size for a specification and quote →