SPC Commercial Flooring, Plank Textures Collection 1

3.5–7 mm

Thickness

0.1–0.5 mm

Wear layer

Unilin / Valinge 2G

Click system

600 m²

MOQ (stock film)

Surfaces and colours

Seven embosses. EIR is the only one where the tool follows the print line for line; flat matte, coral and high gloss run on request.

  • Crystal — glassy, fine grain.
  • Shallow — light linear grain.
  • Medium — the house standard for oak and ash.
  • Deep — heavier shadow in the knots.
  • Stone — slate and concrete decors.
  • EIR — embossed in register, registered with the print.
  • Diamond — fine cross-hatch, mostly commercial.
Seven SPC surface embosses: crystal, shallow, medium, deep, stone, EIR, diamond
Crystal · Shallow · Medium · Deep · Stone · EIR · Diamond

Installation

A floating floor over a sound subfloor, no adhesive. Both click systems start at 30° on the long edge; what differs is the short end.

  • 2G — angle and fold. Long edge at 30°, short end folds down and locks itself. No tapping block.
  • 5G — angle and press. Long edge at 30°, short end pressed in flat until it clicks; the tongue carries its own locking lip, so the joint can be lifted again.
Valinge 2G and 5G click systems: 30 degree angling and snapping

Plank Textures Collection 1

See the full SPC specification — thickness, wear layer and options →