Rental & Multi-Family Flooring

Rental flooring is a numbers problem, not a design problem. The cheapest floor per square metre is rarely the cheapest per tenancy — callbacks for a swollen joint or a stain that will not come out cost more than the upgrade.

The two specifications that work

Turnover / budget4 mm SPC, 0.3 mm (12 mil) wear layer, Class 23
Standard / long hold5 mm SPC, 0.5 mm (20 mil), Class 23/32
UnderlaymentEVA 2 mm for budget; IXPE 1.5 mm for acoustic requirements
Format182 × 1220 mm — cheapest to replace plank by plank

Why SPC for rentals

  • Waterproof core — a tenant leaving a window open or a washing machine leaking does not write off the floor.
  • Plank replacement — one damaged plank can be lifted and swapped without pulling the room.
  • Click install — a 60 m² unit is a one-day job for two fitters, which matters between tenancies.
  • No acclimation surprises — SPC moves far less than laminate, so thresholds and skirting stay tight.

Products for rentals

Buying notes

Order 5 % overage for future repairs and keep one carton per colour on site — film batches change and a later match is never exact. For multi-family projects, ask for pallet-level labelling by unit so the installers are not sorting cartons on the landing.

Common questions

12 mil or 20 mil?

12 mil is fine for a single tenancy cycle in a low-traffic unit. If the floor will outlive two or three tenancies, 20 mil is cheaper over its life.

Can it be installed over old vinyl?

Usually yes, if the old floor is well bonded and flat. Test any suspect vinyl for asbestos before cutting.

Request portfolio pricing and a sample box →

Related applications