Bathroom Flooring

A bathroom floor fails in two places: at the joints, and at the perimeter. The planks themselves are usually fine. So the specification is less about the surface and more about what happens when water sits at the edge of the room for an hour.

Specification rules

  • Rigid SPC core only. Not laminate, not engineered wood, not glue-down LVT on a timber subfloor.
  • R10 minimum slip resistance. R11 if the room is used by children or older adults.
  • Seal the perimeter. A 10 mm expansion gap covered by skirting is correct for dry rooms; in a bathroom, run a bead of neutral-cure silicone at the gap before fitting the skirting.
  • Tiled shower areas. Use a shower tray or a tanked wet-room former. SPC is waterproof, but it is not a drainage membrane.
  • Underfloor heating. SPC works up to 27 °C surface temperature and 0.15 m²K/W thermal resistance — check the mat before you buy.

What we recommend

Product5 mm SPC Click Plank, 20 mil wear layer
Slip ratingR10 standard, R11 on request
EdgeMicro bevel — a painted bevel traps less soap residue
Format182 × 1220 mm, or 12″ × 24″ tile format for a tiled look
MOQ600 m² per colour

Products for bathrooms

Installation notes

Acclimatise for 48 hours. Leave 10 mm at walls, 12 mm around pipes and door frames. Silicone the perimeter in wet zones. Do not silicone the click joints themselves — the profile needs to move. Wipe standing water rather than letting it pool at the threshold; the core will not swell, but the adhesive on the skirting might.

Common questions

Can SPC go in a shower?

No. It is fine for the bathroom floor, but a shower needs a graded tray or a tanked former with a drain.

Is it slippery when wet?

R10 is the standard for domestic wet rooms; it is not a non-slip surface. For commercial washrooms ask for R11.

Ask for a bathroom specification and sample box →

Related applications

Matching wall panels

If the floor and walls should read as one scheme, the WPC fluted wall panel uses the same decor films as our SPC range and installs over existing tiles — no grout, no wet trades.